solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / sda160 __ __ __ screening 2 / __ = not screened tx = tx level txv = txv s = s level terminals _ = spade terminals t = turret terminals peak inverse voltage (per leg) a = 50v, b = 100v, c = 150v, d = 200v, e = 250v, f = 300v, sda160a thru sda160f 40 amps 50 300 volts hyper fast recovery three phase bridge rectifier features: ? hyper fast reverse recovery time 40 ns max 4 / ? average output current 40 amps @ 55 c ? piv 50 to 300 volts per leg ? available with turret or spade terminals ? high surge rating- 250a ? thermally superior encapsulant ? hermetically sealed diode cells ? replacement for unitrode 800 series ? aluminum case, electrically insulated ? available in higher voltages ? available in hyper fast recovery times maximum ratings 3 / rating symbol value unit peak repetitive reverse voltage 5 / (per leg) and dc blocking voltage (per leg) sda160a sda160b sda160c sda160d sda160e sda160f v rm (rep) vr 50 100 150 200 250 300 volts half wave rectified forward current, averaged over full cycle (resistive load, 60 hz, sine wave, t c = 55 c) i o 40 amps peak repetitive forward current (per leg) (t c = 55 c, 8.3 msec pulse, allow junction to reach equilibrium between pulses) i fm (rep) 150 amps peak surge current (per assembly) (t c = 55 c, superimposed on rated current at rated voltage, 8.3 msec pulse) i fm (surge) 250 amps operating & storage temperature t op and t stg -65 to +150 c thermal resistance, junction to case r jc 1.5 c/w sda160 packages: notes: 1 / for ordering information, price, and availability- contact factory. 2 / screened to mil-prf-19500. 3 / unless otherwise specified, all electrical characteristics @25oc. 4 / recovery conditions: i f = 0.5 amp, i r = 1.0 amp rec. to .25 amp. 5 / for rms reverse voltage, multiply v r values by .707 turret terminals: spade terminals: note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: RA0089a doc
electrical characteristics (per leg) 3 / 6 / characteristics symbol value unit maximum instantaneous forward voltage drop (i f = 10a, 60hz, 300 s pulse, t c = 25 c) v f 1.2 volts maximum reverse leakage current (rated v r , t c = 25 c) i r1 20 a maximum reverse leakage current (rated v r , t c = 100 c) i r2 2 ma maximum reverse recovery time (i f = 500ma, i r = 1a, i rr = 250ma) t rr 40 ns spade terminal package outline: turret terminal package outline: tolerance: .xx = .03 .xxx = .020 notes: 1 / for ordering information, price, and avai lability- contact factory. 4 / recovery conditions: i f = 0.5 amp, i r = 1.0 amp rec. to .25 amp. 2 / screened to mil-prf-19500. 5 / for rms reverse voltage, multiply v r values by .707 3 / unless otherwise specified, all electrical characteristics @25oc. 6 / for information on operating curves, contact factory. solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sda160a thru sd160f note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: RA0089a doc
|
